Product Category

SMF-610 high speed multipurpose disc type PE PP pulverizer mill

SMF-610 high speed multipurpose disc type PE PP pulverizer mill

This SMF series pulverizer is widely used in rubber industry. It is also suitable for PE, PP, PVC flakes into powder.

Quantity:

Application & Features

Application:

This SMF series pulverizer is widely used in plastic and rubber industry. It is suitable for PE, PP, PVC flakes into powder.

The principle of the pulverizer is to drive the cutter head by the spindle equipped with imported precision bearings. Under the driving of the cutter head, the movable knife rotates at a high speed and is tangent to the fixed cutter, so that the incoming materials are strongly collided and milled. Powder, through the combination of wind and water cooling, effectively control the material crushing temperature, to ensure that the quality of the material to be crushed does not change, the machine is equipped with automatic feeding, discharging and automatic screening back grinding system, greatly reducing labor intensity. The whole grinding process is completely closed, no dust leakage, and when the refueling is cleaned, it is only necessary to open the door cover for maintenance. The host start is started in a new triangle mode, which greatly reduces the current when the motor starts.

Features:

1. The machine can grind various soft and hard materials into powders of 10mesh to 100mesh at room temperature;

2. Wide range of applications, PE, LDPE, PVC, ABS,EVA, PS and other plastics with different molecular structures can be used;

3. Compared with ordinary pulverizers, this type of machine has two or three times output. With automatic dust removal device, it is the most ideal energy-saving and environmentally friendly plastic pulverizing equipment in China.

4. The machine is composed of seven parts: automatic feeding, main engine, wind conveying system, cyclone separation, automatic screening, automatic coarse material grinding, and high efficiency dust removal system. It has a high degree of automation and a small area;

5. The sharpener is made of high quality imported steel, which has good wear resistance and is suitable for continuous operation.

6. The knife can be adjusted quickly, and the operation and maintenance are simple and easy;

7. The main shaft bearing adopts NSK, with all imported oil seals.

Technical Parameters:

No.	Name	Specifications
1	Suitable material	PVC, PE, PP, ABS, PS, PA, PC and rubber
2	Bearing	NSK
3	Output powder	10-100mesh
4	Main motor power	55KW
5	Blower power	5.5KW
6	Total power	63KW
7	Blade disk diameter	610mm
8	Vibrator	ZDS-1000
9	Capacity	200-300kg for PE/PP material
10	Dust removal	16 bags
11	Flow valve power	0.75KW
12	Cooling type	Air & Water
13	Voltage	Customized
14	Dimension	3500x2400x4000
15	Weight	2100kg